Tell free:+86-186-2627-0123   
You are here: Home » Materials » CE Canvas Phenolic

CE CANVAS PHENOLIC IS WIDELY USED FOR:

  • Insulators for electromechanical devices
  • Gears
  • Rollers
  • Jigs
  • Fixtures
  • Pulleys
  • Wear pads

PERFORMANCE CHARACTERISTICS:

  • High strength and stiffness at relatively low cost
  • Excellent dimensional stability
  • Creep resistance
  • Good electrical insulating properties

COMMON BRANDS:

  • Micarta
  • Bakelite®

TECHNICAL RESOURCES

  Acetal Data Sheet
​  Chemical Resistance Chart
​  Machine Builders Illustrated Brochure
​  Machine Builders Pack & Convey Line Card
​  Medical Grade & High Performance Plastics
EXPLORE OTHER PRODUCTS & SERVICES

CE Canvas Phenolic

Electrical grade phenolic sheet material with cotton canvas reinforcement

CE canvas phenolic sheet is an electrical grade high strength composite that consists of phenolic resin impregnated into layers of woven cotton canvas fabric. CE phenolic is strong and stiff and it has excellent creep resistance and outstanding dimensional stability. It is used for a wide variety of industrial applications including insulators for electromechanical devices, jigs, fixtures, and gears.

Tech Tip– Cotton canvas is a relatively coarse woven fabric and because of this, CE phenolic sheet is most often used for parts that lack small machined features. Linen phenolic sheet is more expensive than canvas phenolic but it is made using a finer woven cloth. This allows linen phenolic to be used for machined parts that have small geometric features. 
CE canvas phenolic  MATERIALS
Industrial Phenolic Laminates are made by applying heat and pressure to layers of paper, canvas, linen or glass cloth impregnated with synthetic themosetting resins.
 When heat and pressure are applied to the layers, a "set" shape that cannot be softened again - therefore, these materials are called "thermosets". 

TYPICAL PROPERTIES OF CE CANVAS PHENOLIC

  UNITS ASTM
TEST
CE
(CANVAS PHENOLIC)
Specific gravity   D792 1.37
Tensile strength(CW) psi D638 9,000
Flexural strength (CW) psi D790 15,000
Flexural modulus psi D790 1,500,000
Compressive strength psi D695 34,000
Hardness Rockwell M D785 100
Izod impact (notched, CW) ft-lbs/in of notch D256 1.5
Maximum continuous service temperature in air °F   257
Water absorption (immersion 24 hours) D229 2.00

Values may vary according to brand name. Please ask your Dtmar Plastics representative for more specific information about an individual brand.
If you do not satisfy our products or service, welcome to send your complains to us, please state details with text and pictures or video to info@dtmar.com 
QUICK CONTACT

© 2017-2019  DOTMAR (Suzhou) Engineering Plastics Co.,Ltd.  All rights reserved.     Site Map     Designed by iwonder.cn